2 + 2 Year Warranty - 2 Full Years and 2 Years Labor only
Warranty Information - Most of our lights come with our 4-year Warranty. For the first 2 years the light is fully warranted against defective parts and workmanship. Also during this period if your light cannot be immediately remedied, we will send you a completely new light free of charge. For the 3rd and 4th years only workmanship is covered. What this means is the only thing you will pay for is parts. We will replace and/or repair free of charge.
Product Specifications
| Light | Battery Type |
Burn Time Low (hrs.) |
Burn Time High |
Weight (lbs.) |
Bulb Type |
Warranty |
|---|---|---|---|---|---|---|
| Bronze Pro 6 Box Light | Gell Cell | 6.5 | 1.5 | 2.5 | 10564 | 1 year unlimited warranty |
| Bronze Pro 8 Mini Box Light | NiMh | 7.5 | 1.5 | 0.5 | 10564/7V30 | 4 Years (2 Years on Complete Unit, 2 Years Labor Only) |
| Gold Pro 21 Box Light | NiMh | 10-12 | 2 | 2.5 | 12V32, 12V32X | 4 Years (2 Years on Complete Unit, 2 Years Labor Only) |
| Platinum Pro 26 Box Light | NiMh | 12-14 | 3 | 3 | 24V98, 24V98X | 4 Years (2 Years on Complete Unit, 2 Years Labor Only) |
|
Light |
Battery |
Burn |
Burn |
Weight |
Bulb |
Warranty |
|
|
|
|
|
|
|
|
| Silver Pro 14 Belt Light | NiMh | 8-10 | 2 | 1.5 | CB10X | 4 Years (2 Years on Complete Unit, 2 Years Labor Only) |
| Gold Pro 17 Belt Light | NiMh | 10.12 | 2 | 2 | 12V32, 12V32X, CB10X |
4 Years (2 Years on Complete Unit, 2 Years Labor Only) |
| Gold Pro 21 Budget Belt Light | NiMh | 10.12 | 2 | 2.5 | 12V32, 12V32X | 1 year unlimited warranty |
| Gold Pro 21 Belt Light | NiMh | 10-12 | 2 | 2.5 | 12V32, 12V32X | 4 Years (2 Years on Complete Unit, 2 Years Labor Only) |
| Platinum Pro 26 Belt Light | NiMh | 12-15 | 3 | 3 | 24V98, 24V98X | 4 Years (2 Years on Complete Unit, 2 Years Labor Only) |
The Switch
Switches on our lights saves little electrical energy at lower settings. The current drain on a battery is basically determined by the amount of amperage that a particular bulb draws during use. This is the reason for dual filament "High-Low" type bulb and the 5100 style head on all of our lights. This type bulb draws much less current from the battery when the low side is used than when the high side is used, no matter where the battery switch is set.
To prevent excessive battery drain, we install a thermistor shut-off on all of our lights. This shut-off automatically turns off your light when the bright or high side of the bulb is in use and the battery switch is set at any click other than the highest position. When this occurs, simply turn the battery switch back to the brightest setting, and then you can use the rotary switch on the headpiece to switch to the low side of the bulb. The shut-off does not affect the low side of the bulb, so it can be used at any desired brightness setting by using the battery switch. A quick look at the burn times on our lights as listed above should help you understand this feature. The automatic shut-off will prevent the possibility of you having to walk out of the woods in the dark.
Charging
Smart Charger
If you burn your light for 10 minutes or 10 hours all you have to do is plug your smart charger into your light. The worry is over; you will not over charge your battery. It charges your battery to a full charge then switches to a trickle charge. Your light can be left on charge without damaging your battery but it is still recommended that you unplug it within in 24 hours. The amber L.E.D. shows that the charger is working; the green L.E.D. shows that your light is ready. *WARNING* DO NOT RUN YOUR BATTERY ALL THE WAY DOWN. PUT YOUR BATTERY ON CHARGE AFTER EACH USE.
Standard Wall Charger
When in use, the charger should feel warm to the touch while charging. Charging your battery for 10 – 18 hours should bring your battery pack to full charge, depending on time used since last charge. WHEN USING THIS CHARGER, DO NOT LEAVE YOUR LIGHT PLUGGED IN FOR LONGER THAN 24 HOURS! If your light is not in use, charge it once a month. Avoid running battery completely down!
| WE ACCEPT | |
![]() OR |
|
|

Gold Pro 21 Box Light
Package includes:
Re-Designed Dimmer Feature
on 1st position of Click Switch
5100 Style Adcon Head
Bump Cap
Adcon Smart Charger
Extra Bulb
Pop Cover
Walk Light
Click Switch
$280

"Brand new by popular demand. The Re-Designed Dimmer Switch. One of the biggest problems with the 20 volt plus belt lights on the market today is that sometimes they are just too bright. When your in that critical situation on that important cast and need that dim light so that the coon will look, we got you covered. The dimmer switch feature uses the 1st setting of the click switch to reduce the brightness of your light much like what an Amber Pop Cover will do. Available in the 21, 26, and 28 volt lights only."

Silver Pro 14 Belt Light
Package includes:
5100 Style Adcon Head
Bump Cap
Charger
Extra Bulb
Pop Cover
Belt
Bulb/Lens Pouch
Walk Light
Click Switch
$245
Gold Pro 17 Belt Light

Gold Pro 17 Belt Light
Package includes:
5100 Style Adcon Head
Bump Cap
Adcon Smart Charger
Extra Bulb
Pop Cover
Belt
Bulb/Lens Pouch
Walk Light
Click Switch
$290

Gold Pro 21 Budget Belt Light
Package includes:
5100 Style Adcon Head
Bump Cap
Standard Wall Charger
Extra Bulb
Belt
Click Switch
Walk Light Not Included
(1 year Warranty Only)
$235

Gold Pro 21 Belt Light
Package includes:
Walking Light
Re-Designed Dimmer Feature
on 1st position of Click Switch
5100 Style Adcon Head
Bump Cap
Adcon Smart Charger
Extra Bulb
Pop Cover
Belt
Bulb/Lens Pouch
Click Switch
$310

Platinum Pro 26 Belt Light
Package includes:
Walking Light
Re-Designed Dimmer Feature
on 1st position of Click Switch
5100 Style Adcon Head
Bump Cap
Adcon Smart Charger
Extra Bulb
Pop Cover
Belt
Bulb/Lens Pouch
Click Switch
$360
Shipping on all light packages $15
If you have any questions or need any more info feel free to contact us @ sales@thebuzzzardsroost.com
_________________________________________________________________
The Buzzzard's Roost - (252) 795-5000
WE ACCEPT

OR




